A PHP Error was encountered

Severity: Notice

Message: Undefined index: HTTP_ACCEPT_LANGUAGE

Filename: front/maintemplate.php

Line Number: 2

IDIS Glossary


Dictionary about IDIS products description.

home Support Glossary


Use an index to find information quickly.

total 107 data ( 11/ 16 page )

  • 37
  • [A]Anti-flickering

    Some light sources are flickering lights, such as fluorescent lights. Human eyes may not notice it but cameras can notice it. It may cause flickering or rolling artifacts on the video. Use anti-flickering option to match the lighting condition of the scene to avoid these artifacts.

  • 36
  • [W]White balance

    Camera is an imaging sensor that collects the light and converts the light signals into images. And different light sources have different light spectrum, which changes the reflected lights on the object. So the same object may look like it has different colors depending on its light source. In most cases, automatic white balance works good enough. But if it does not, use the white balance to match the light profile closest to the light condition. Sometimes it is called color temperature adjustment.

  • 35
  • [E]eSATA

    External SATA (eSATA) connector is used to connect additional external storage to the NVR. Mega pixel requires more storage, and you can never have enough storage. eSATA storage boxes come in different fashions and configurations. Sometimes it comes with RAID or mirroring option, where you need to pre-configure the eSATA storage box before you connect to the NVR. Not all eSATA storage controller chipsets are compatible with NVR. Please refer to the approved eSATA storage boxes, and IDIS provides an rack mountable eSATA storage for the NVR.

    eSATA is hotpluggable, but it ls always advised to shutdown the NVR before you turn off or unplug the eSATA storages.

  • 34
  • [S]System event


    It monitors if the NVR has been recording at least once during the specified duration. If not, you can have your NVR notifiy you of the condition. Maybe the recording schedule has changed, and it is not recording properly as you intended it.


    [Alarm input]

    It monitors if an alarm input has been triggered at least once during the specified duration. If it is a door, it is safe to assume that the door will be open at least once a day. If this was not detected, maybe the sensor is bad or sensor wiring is bad. You can have your NVR notify this condition so that you can send a technician to take a look.

  • 33
  • [S]S.M.A.R.T.

    Self-Monitoring, Analysis and Reporting Technology. HDD it does have a brain. It keeps monitoring its operating condition and gathers statistics. NVR can read this information such as highest temperatures the HDD reached. This information can be used to adjust the installation environment to a more friendly one for the operation of NVR.

  • 32
  • [T]Trip wire

    It is a feature of DirectIP camera. User defines a line in the scene, where the line is being monitored to detect an object crossing the line one way or the other way or both. It can be used to trigger an event condition.

  • 31
  • [T]Trip zone

    It is a feature of DIP camera. User defines an area in the scene, where the area is being monitored to detect an object that crosses the zone inward or outward. It can be used to trigger an event condition.