Dual Sensor Thermal Camera
  • Dual Sensor (Thermal + Sensor) IP Camera
  • 3Mode Display Support (Visual / Thermal / Overlay)
  • White LED (Manual Operation or Temperature Alarm)
  • IP67 Ingress Protection
  • Onvif-compliant
Some IDIS thermal cameras are capable of accurate temperature measurements under particular circumstances, but IDIS has not designed them for the specific purpose of human fever detection nor for the diagnosis, mitigation or prevention of any illness or health condition. IDIS thermal cameras are not approved by the FDA in the US for this purpose and IDIS does not specifically market or make claims for any current products for use in human body temperature measurement.


Dual Sensor Thermal Camera
  • Thermal Detection

  • Dual Sensor

  • 3 Mode Display

  • Alarm Activation

Thermal Image
IR Sensor Frame Rate < 9 Hz
IR Sensor Resolution 160 (h) × 120 (v) Pixel
Spectral Range LWIR, 8 to 14μm
Field of View (FOV) 57° HFOV, 71° Diagonal (f/1.1 Silicon Double)
Temperature Sensitivity < 50 mK (0.05°C)
Temperature Range Low Gain Mode : -10°C ~ 450°C
High Gain Mode : -10°C ~ 140°C
Visible Image
CMOS Sensor 1/2.9 inch Sony
CMOS Progressive Scan
Effective Pixels 3096 (H) x 2202 (V) : 6.82M
Min. Illumination0.1 Lux / F#1.2
Focal Length3.5mm
Frame Rate 30fps
Resized Resolution MAX : 2592 (h) × 1944 (v) Pixel
MIN : 640(h) x 480 (v) Pixel
Multi User Access 8 (RTSP Streaming)
Alarm Out 1 Port (Dry Contact, Relay Out)
Operating Temperature 0°C ~ +50°C (32°F ~ +122°F)
Power PoE(802.3.af), DC12V
Power Consumption 5W
Dimension (WxHxD) 80 x 131 x 47 (mm)
Weight 400g
Outdoor Ready IP67
[Brochure] DC-TH2012WR
[Manual] Thermal Network Camera Quick Guide - How to set Temperature Detection
[Manual] Thermal Network Camera Quick Guide
[Manual] DC-TH201x Installation Guide
[Software] DC-TH201x Firmware v5.0.1.200821