|112||Camera||Q. What Onvif profile do IDIS Cameras support ?||2017-10-26|
|111||General||Q. Which NAT type does support FEN service ?||2017-10-26|
By creating a user custom name (FEN name) simply from a DirectIP NVR, its device info and
network parameters (including Device name, MAC address, IP address, port info, NAT type, product
info etc.) are automatically registered in the DirectIP FEN server running in the cloud. The user is
able to access the site remotely using this custom name instead of an IP address, as the FEN
server holds of the local device’s connection on the network even in a DHCP environment with
dynamic changing IP.
FEN service uses UDP hole punching for NAT traversal to gather address information of two ends, an NVR and a remote client, and NAT type in a site where an NVR is or a remote client is should support UDP communication.
[NAT types supporting UDP communication]
- Open internet
- Cone types (Full cone, Restricted cone, Port restricted cone)
[NAT types not supporting UDP communication]
- UDP blocked
- Symmetric UDP firewall
|110||Camera||Q. How can I request 3rd party camera compatibility test?||2017-10-26|
To make 3rd party cameras to be compatible with our products, we need to go through the steps listed below.
We need below information with your request.
(1) Model names and firmware version of 3rd party cameras to be tested with our products.
(2) Which IDIS product needs to be compatible to the 3rd party cameras.
(3. Expected business opportunity from that 3rd party camera integration.
(4) Due date for 3rd party cameras to be integrated with IDIS products.
Our sales department decides whether we proceed the integration or not.
When it is decided to proceed, we will provide IDIS 3rd Party Test Tool to check if the current operations of 3rd party cameras to our product. Please run the tool and send us the result. To get IDIS 3rd Party Test Tool, please contact IDIS Technical support team.
Lastly, send us at least two of the 3rd party cameras for us to integrate and test the cameras.
|109||Video Recorder||Q. What are the status description of LED indicators on the front panel of NVRs?||2017-10-26|
Combinations of blinking status of Panic LED and Alarm LED on the front panel of NVRs indicate booting sequences.
|108||Software||Q. How to set User Alarm-in configuration on IDIS Solution Suite?||2017-09-19|
Please refer to the attachment for how to set up user alarm-in in IDIS Solution Suite
|107||Software||Q. How to set Loadbalancing on IDIS Solution Suite?||2017-09-19|
IDIS Solution Suite supports load balancing with more than one streaming services.
Devices are evenly allocated to streaming services when in load balancing mode, and once one streaming service is gone offline, the other service takes all the devices from the old service.
Please refer to the attachment to find out how to configure load balancing.
|106||Video Recorder||Q. How many RTSP sessions does IDIS TVI DVR support?||2017-08-16|
TR series can connect maximum 10 RTSP sessions. This goes the same for TR-22xx and TR-42xx series.
The sum of RTSP sessions and live monitoring (watch) channels for TR series is maximum 10.
The network transmission performance of TR-2204 is as follows mentioned in our global web site.
- 30ips @ Full HD per channel, shared with recording.
That is, TR-2204 can multiple RTSP channels more than 4, but, the transmission performance depends on the number of recording operation channels as well as the number of RTSP and watch channels.
But, TR-4208(R) and TR-4216(R) can support up to 120 ips@Full HD regardless of recording operation with multiple RTSP channels.
So, we recommend to use TR-42xx TVR if the RTSP stream performance should be stable regardless of recording operation.
|105||Video Recorder||Q. How many cameras can I register to a NVR?||2017-08-16|
As resolution of a camera increases, a NVR to which the camera is registered needs more performance to recording as well as to decoding it on-screen. Sometimes it takes even more resource when it is transmitting images to a client.
For easier and simpler designing cameras and NVRs, please refer to the table attached below.
updated (13th Jan 2020) :
From v5.2.0 or higher version, channel allocation issue has been solved.
|104||Camera||Q. What are the MAT(Motion Adaptive Transmission) supporting cameras?||2017-07-04|
MAT(Motion Adaptive Transmission) is available in DirectIP mode.
Here is a list of IDIS cameras supporting MAT.
DC-D3233X: v1.2.0 or higher
DC-D3233WRX: v1.2.0 or higher
DC-D3233RX: v1.2.0 or higher
DC-D3233HRX: v1.2.0 or higher
DC-D3212X: v1.2.0 or higher
DC-D3212RX: v1.2.0 or higher
DC-T3533HRX: v1.1.0 or higher
DC-T3243HRX: v1.2.0 or higher
DC-T3233HRX: v1.2.0 or higher
DC-T1833WHR: v1.2.0 or higher
DC-E3212WRX: v1.2.0 or higher
DC-B3303X: v1.2.1 or higher
DC-B1803: v1.5.1 or higher
Other cameras with H.264 codec do not support MAT feature.
|103||Software||Q. Which SQLite version is compatible with IDIS Solution Suite?||2017-07-03|
SQLite has been used in ISS and the latest SQLite version compatible with ISS is 188.8.131.52.
ISS has its own DB files instead of DBMS files. So, ISS DB cannot be directly accessed by SQL commands because the DB files are encrypted and GDK, an IDIS Open Source Software, should be used to access the ISS DB.
|102||Software||Q. Is it possible to play a video in a HDD from an NVR on PC?||2017-06-27|
With iHDP feature, it is possible to playback recorded data in a HDD that had been used in a NVR.
Please refer to the attachment.
|101||Software||Q. How to use Quick Controls in IDIS Center?||2017-06-23|
1. Quick Zoom
a. Ctrl + L-Button Drag Rectangle (on Original Image) : Dynamic Zoom
b. Ctrl + L-Button Drag : Panning Zoom-In Image
c. Ctrl + M-Button Down : Reset (Original Image)
d. Ctrl + Wheel Scroll : Zoom-In / Out (Step)
2. Quick Dewarp
a. Ctrl + L-Button Drag Rectangle (on Original Image) : Dynamic PT(Fov.)
b. Ctrl + M-Button Down : Reset (Original Image)
c. Ctrl + Wheel Scroll : Fov-In / Out (Step)
d. Ctrl + R-Button Drag (Up<->Down) : Fov-In / Out
3. Quick PTZ (IDIS Camera Rubber Band)
a. Ctrl + L-Button Drag : Rubber Band
b. Ctrl + R-Button Drag : Zoom-In / Out
c. Ctrl + Wheel Scroll : Zoom-In / Out (Step)
d. Ctrl + Shift + Click : Sling Shot
Quick Control is available in v4.2.0 or higher version.
|100||Software||Q. How to change IDIS Solution Suite software license method from online to offline?||2017-06-22|
Here are simple steps to change licensing method to offline from online.
- Go to Start > IDIS Solution Suite > License Tool.
- Run License Tool.
- Click Update as the image below shows.
- Select "OFFLINE" and proceed the rest of the steps as you authenticate the license via online licensing method.
|99||Software||Q. What is the procedure to activate license for IDIS Solution suite ?||2017-06-22|
A license for IDIS Solution Suite is activated via either offline or online.
Please have a look at the attachment for further steps.
|98||Accessory||Q. Which NVRs and Softwares are compatible with DV-1104(a video analytics box)?||2017-06-19|
- DR-2300 series: v3.0.0 or higher
- DR-4300 series: v3.1.0 or higher
- DR-6300 series: v3.1.0 or higher
- DR-8300 series: v3.1.0 or higher
- IDIS Center: v4.1.0
- IDIS Solution Suite will support DV-1104 in a future version.